2:20 AM
wedop
how to sand wood handrails
When sanding hardwoods, the goal is usually the smoothest surface possible, but this is not the case when sanding an exterior deck surface. for sanding deck floorboards, use sandpapers with grits no rougher than 60 or 80. sanding with finer-grit papers (100-grit or above) will smooth the wood to the point where the pores begin to close down, which will hinder the absorption of stain or sealer. Pretend this honey oak-stained piece of wood is a railing. we did this whole process without removing the railing, so pretend like this whole process was done inside, on the installed railings. two large projects that remain are the huge kitchen with a zillion cabinets just begging for sanding/painting, and the two stair flights and the 2. 4 – sanding the rails. the most visible part of the deck is the rail. it is important to sand it well because most people focus their attention on this part. you also need to smoothen the handrail to avoid splinter formation that can cause injury your hands. to sand the railings, use sandpaper that has around a 120 grit..
how to sand wood handrails
The first step in refinishing or painting a wood stair railing is to strip off the old finish or paint. removing the old finish allows the new finish or paint to adhere to the wood properly. stripping is done either by sanding, using a wood finish remover or a combination of both..
