12:55 AM
wedop
best way to smooth wood
In order to get a smooth wood finish, you’ll want to start with a low grit, like 80 or 100. this will leave the wood rough, but it takes away imperfections and finish faster. you go progressively finer in order to remove some of the roughness left by the coarser grit.. With film finish like varnish, the finish needs to be smooth not the wood. use 2 or 3 or more grits to achieve desired smoothness i.e. start with coarse p-40, p-60 then medium p-80, p-120 and finally fine p-100, p-120 or higher like p-150, p-180; i always sand between coats. that way the finish has got more depth to it so i highly recommend it. Make the transitions between wood and filler smooth and seamless. a palm sander or multi-tool (great for corners!) will save you hours on a project like removing wood grain texture. if you are intending to stain rather than paint, you can match the wood filler to the wood grain and make it stainable..
best way to smooth wood
Sand the wood in flat, smooth areas of wood with a random orbital sander and 180-grit sandpaper, wearing a dust mask or respirator and hearing protection. the intent is not to strip the wood of all of the coatings and stains but simply to smooth out the surface and provide some "tooth," or slight scratches, to help the paint bond.. Prepare your workpiece a glass-smooth finish begins with a level, even surface. to achieve this on open-grain woods (oak, ash, walnut, or mahogany, for instance), first fill the pores with a wood-grain filler, photo below..
