1:24 AM
wedop
best way to restain wood trim
Minwax® polyshades® is an easy way to change the color of your currently stained or polyurethane finished wood. there’s no stripping or heavy sanding necessary to remove the old finish! simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of polyshades® (see step-by-step instructions provided in this guide).. The invention of modern penetrating stains in the 1960s made it easy for homeowners to get a consistent color, but those stains work best if a clear sealer of lacquer or shellac is applied to the wood first. pro tip: maple, cherry, and pine don't absorb stains evenly, but you can give these woods a uniform color with aniline dyes. step 6. First, make sure you sand the wood- even if you don't see any sort of finish or top coat. you must sand with the grain (in the same direction as the wood grain). start with a coarse-grit, and end with a fine-grit for best results. a nice smooth wood surface will readily accept your stain and it will color evenly..
best way to restain wood trim
Our plaster (lath + plaster) is 1.25" thick, but drywall is 1/2" or 5/8", so if your place is like ours, you'll have a 3/4" or 5/8" gap between the back of the trim and the new wall. lots of ways to solve that problem too (strapping, shims etc), but all more work. removing the trim cleanly is upfront work, but may yield better results long term.. Stained wood trim adds a level of elegant beauty to your home. there are some things to consider before you decide to stain trim. it can be time consuming and it takes a level of technique to get the color just right so that it comes out even all the way around. with the right information, you can learn how to stain wood trim correctly..
